耶拿*402-881.245

我公司的主要業務：

1、提供Thermo 全線產品的原廠消耗品、維修配件和維修服務，有專業的服務團隊為用戶提供及時的維修服務；

2.各種氣體純化設備、氣體匯流系統、氣體過濾裝置、電化學拋光管、不銹鋼波紋管閥等；

3、精密儀器的穩壓電源，冷卻循環水系統，為用戶制定*的實驗室水電氣解決方案；

4、經銷進口原子吸收光譜儀（AAS），電感耦合等離子體光譜儀（ICP-AES），電感耦合等離子體質譜儀（ICP-MS）等分析儀器。

5、與耶拿*合作經營耶拿全線產品的原廠原裝消耗品，維修配件和維修服務，貨從耶拿倉庫發出。

6、承接實驗室整體搬遷服務

我司經營德國耶拿Analytik Jena*儀器消耗品、儀器輔助材料等相關配件耗材，常用耗材配件長期現貨供應。

1．402-886.311 Syringe graduated 500 μl with removable needle for manual injection

2. 402-889.589 Syringe 10 μl, for Autoinjector, with removable needle

3．402-889.590 Syringe 20 μl, for Autoinjector, with removable needle

4. 402-889.591 Syringe 40 μl, for Autoinjector, with removable needle

5. 402-889.592 Syringe 100 μl, for Autoinjector, with removable needle

6.402-823.080 100μl syringe H ?8 RN 0,64(G23s)c51

7.402-886.305 500μl SYR H ?8Vent 1/4"-28 RN 1,0x0,7c51

8. 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces

9. 402-823.106 Syringe 20 μl, for Autoinjector, with removable needle

10. 402-886.306 Needle 1 mm x 0.7 mm; for all types of syringes, 3 pieces

11.402-889.186 Removable special needles, set of 3 pieces

Consumables

multi N/C series

effective from 01.01.2010

PriorityOrder numberDescription

CONSUMABLES TOC

( all types of instruments )

A  402-810.047  Special catalyst multi N/C, one filling, 40 g

recommended for multi N/C 3000/3100

A  402-810.048  Special catalyst platinum, one refill

multi N/C 2100: recommended for multi N/C 2000/2100/2100 S multi N/C 2100 S: recommended for multi N/C 2000/2100/2100 S

A402-810.050  Halogen absorber filling (copper- and brass wool)

Consumables multi N/C series

Analytik Jena AG, 15.12.20092 / 22effective from 01.01.2010

B402-810.058Special catalyst multi N/C, 200 g

recommended for multi N/C 3000/3100

B402-810.059Special catalyst platinum, sufficient for 5 refills

multi N/C 2100: recommended for multi N/C 2000/2100/2100 S multi N/C 2100 S: recommended for multi N/C 2000/2100/2100 S

A402-825.044Quartz wool, 1 packet

A402-825.150U-tube, o.d. = 11 mm, without filling for halogenabsorber

( without connections )

A 402-881.006 Quartz glass cullet, coarse grains, packet of 80 g

A402-881.228Disposable retention filter (water trap) A402-881.229TC prefilter (aerosol trap)

402-881.245Set of TC prefilter and water trap

A402-885.017High-temperature mat, set of 3 pieces

B402-885.019Halogen absorber, complete with U-tube

multi N/C 2100 and multi N/C 2100 S multi N/C 2100 WEARING MATERIAL

B402-000.008Stirring magnets, 15 mm x 6 mm, 10 pieces

A402-520.137Glass screw joint (gray)

A402-815.058Lab-type screw joint D 3.2 - GL 14, complete (red)

A402-815.102O-rings for combustion tube, set of 3 pieces

B402-815.138Dosing syringe for phosphoric acid, 5 ml

402-815.819O-ring; 15.5 mm x 2.5 mm; Viton IC-vessel N/C 2100 S ( Stopper )

A402-823.056Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces

A402-825.041Fork-type clamp KS 13/2 with clamping screw

A402-881.026Finger-Tight-Set 1/8" for tube set, PEEK

A402-881.027Finger-Tight-Set 1/16" for tube set, PEEK

A 402-881.238 Septa for pneumatic heads, 10 mm o.d., set of 10 pieces

multi N/C 2100: only for N/C 2100 S

A402-884.005Pump hose for peristaltic pump, waste

A402-885.010Combustion tube

A402-885.011Pump hose for H3PO4 pump

B402-886.303Syringe 100 ?l with vent and removable needle 0.63 mm x

0.35  mm (only for APG  60)

B402-886.304Syringe 250 ?l with vent and removable needle 1 mm x 0.7 mm (only for APG 60)

A402-886.305Syringe 500 ?l with vent and removable needle 1 mm x 0.7

mm (only for APG 60)?

A 402-886.306 Needle 1 mm x 0.7 mm; for all types of syringes, 3 pieces

multi N/C 2100: only for multi N/C 2100 S

A402-886.310Septum for syringe (autosampler); 9.5 mm o.d.; 1 piece

B402-886.311Syringe graduated 500 ?l with removable needle for manual injection

A402-886.314Septa pre-cut for septum-head, 11 mm, 3 pieces

A402-886.317 Condensing loop multi N/C 2000/2100/2100 S

B402-886.318Sample vials, 8 ml

50  mm x 18 mm, 125 pieces multi N/C 2100: for APG 60-sampler multi N/C 2100 S: for APG 60-sampler

A402-889.050Septum; 12.5 mm; set of 5 pieces

multi N/C 2100: for manual TIC - Port multi N/C 3100: for POC Modul

B402-889.091Lids for sample vials, 2 ml, set of 500 pieces

B402-889.092Sample vials, 2 ml, set of 100 pieces

( for sample rack with 112 positions )

402-890.100IC condensing vessel multi N/C 2100

A402-890.110tubing kit for multi N/C 2100 S

A402-890.111tubing kit for multi N/C 2100

B402-890.113 needle with luer connector for H3PO4-syringe  402-890.150IC condensing vessel multi N/C 2100 S

WEARING MATERIAL Double Furnace Solids Module

402-889.674Quartz boat, 40 mm x 9 mm, set of 10 pieces

A402-890.103Furnace sealing plug

A402-890.104Solid combustion tube

A402-890.105Hook

A402-890.106Guidance tube

402-890.107Gasket for oxygen lock

A402-890.108Gas transfer tubing, adapter with ball joint

A402-890.109O2  tubing

multi N/C 3100 multi N/C 3100 WEARING MATERIAL

B402-000.005Sample vials, 80 mm x 33 mm, 70 pieces

multi N/C 3100: for dilution rack APG 64

B402-000.008Stirring magnets, 15 mm x 6 mm, 10 pieces

A402-520.135Fork-type clamp for oxygen supply

A402-520.137Glass screw joint (gray)

A402-815.058Lab-type screw joint D 3.2 - GL 14, complete (red)

A402-815.102O-rings for combustion tube, set of 3 pieces

B402-815.204 Septum silicon/PTFE, 24 mm, for screw cap EPA, set of

100  pieces

B402-815.205Screw cap for 40 ml EPA screw thread vial, set of 100 pieces

B402-820.075Bottle Insert

402-825.041Fork-type clamp KS 13/2 with clamping screw

B 402-825.099 Sample vials for dilution rack, 100 mm x 16 mm, 10 pieces

B402-825.119Sample vessels for EPA Sampler with piercing function, set of 100 pieces

40  ml EPA screw thread vial

A402-881.026Finger-Tight-Set 1/8" for tube set, PEEK

A402-881.027Finger-Tight-Set 1/16" for tube set, PEEK

B402-883.005Sample aspiration

multi N/C 3100: also purge tube

A 402-884.005 Pump hose for peristaltic pump, waste

A402-884.019Injection tube

B402-884.021Waste hose with screw joint (2 m)

B402-884.023Lid for Bottle Insert

402-885.002Condensation coil

A402-885.010Combustion tube

A402-885.011Pump hose for H3PO4 pump

A402-885.016 Sample aspiration tube with screw joint

multi N/C 3100: also purge tube

B402-886.319Sample vials for APG 64-sampler, 78 mm x 28 mm, 100 pieces

A402-889.050Septum; 12.5 mm; set of 5 pieces

multi N/C 2100: for manual TIC - Port multi N/C 3100: for POC Modul

402-890.163 Piercing sample aspiration tube for EPA sampler, titanium

402-890.164Piercing sample purge tube for EPA sampler, titanium

402-890.193Tubing kit for multi N/C 3100

402-890.200Condensation vessel

HT 1300

HT 1300 WEARING MATERIAL

402-815.830Gasket for dust trap for HT furnace (34 mm x 4 mm)

A402-825.044Quartz wool, 1 packet

A402-881.013U-tube, o.d. = 21 mm for halogen absorber

A402-881.203Glass tube, straight, without connectors

A402-881.213Headline-Disposable-In-Line-Filter, box of 10 pieces

B402-886.001Ceran field for HT furnace

B402-886.003Connecting hose "Analyt" for HT furnace, 4 mm x 6 mm, 1 m long

B402-886.004Connecting hose "pump" for HT furnace, 4 mm x 6 mm, 1 m long

A402-886.005 Connecting hose "oxygen supply" for HT furnace, 4 mm x

6  mm, 2 m long

B402-886.006Feeding tool for HT furnace

A402-886.014Ceramic combustion tube

B402-886.114 Halogen absorber filling for straight tube A402-886.116Drying agent

A402-886.118Porcelain boat (white); 1,000 pieces

A402-886.312Halogen absorber filling for U-tube, o.d. = 21 mm

( conditioned )

402-886.322Halogen absorber filling (conditioned)

for U-tube, o.d. = 21 mm, set of 5 pieces

Warranty claims and claims related to the fulfillment of manufacture&＃39;s technical specification can only be accepted by using original Analytik Jena components, spares and consumables.

Specifications and order numbers are subject to changes due to further technical development.

Prices are quoted exclusive of value added tax.

Purchase is subject to the General Terms and Conditions of Analytik Jena AG.